Epoxy resin has become increasingly popular in the world of woodworking for its versatility and beautiful finish it provides to wood surfaces. When applied correctly, epoxy resin can create a smooth and glossy finish that enhances the natural beauty of the wood while also providing protection against wear and tear. In this article, we will discuss the steps and techniques to achieve a flawless finish with epoxy resin on wood. This technique is very popular for wood tables, counter tops.
HOW TO PREPATE WOOD TOP
Preparation is key when working with epoxy resin for wood. The surface of the wood must be clean, dry, and free of any dust, oil, or other contaminants that could affect the adhesion of the resin. Start by sanding the wood surface to remove any existing finish and to create a smooth surface for the resin to adhere to. Use a fine grit sandpaper and sand in the direction of the wood grain to avoid scratching the surface.
After sanding, clean the wood surface thoroughly with a tack cloth or a damp cloth to remove any dust or debris. Allow the wood to dry completely before moving on to the next step. It is important to work in a well-ventilated area and wear appropriate safety gear, such as gloves and a mask, when working with epoxy resin. Make sure that your project is level.
Prepare your work surface as resin can be messy.
RESIN MIXING
Once the wood surface is prepared, it is time to mix the epoxy resin according to the manufacturer’s instructions. Select correct type of epoxy, as not all are suitable top coating. We recommend our FAST CURE epoxy resin 2:1 | Resin Glory table top supplies uk It comes in two parts – a resin and a hardener – that must be mixed together in the correct ratio to ensure proper curing. Carefully measure out the resin and hardener and mix them together thoroughly for the recommended amount of time. It is important to follow the mixing instructions precisely to ensure that the resin cures properly.
POURING
After mixing the epoxy resin, pour it onto the wood surface in a thin, even layer, this is your seal coat. Use a brush or foam roller to spread the resin evenly over the entire surface, making sure to cover all areas of the wood. Work quickly to avoid the resin from setting before you finish spreading it. You can also use a heat gun or a torch to remove any air bubbles that may form in the resin.
Once the resin is applied, allow it to cure according to the manufacturer’s instructions. This may take anywhere from a few hours, like our fast cure resin 4-8h, to a few days, depending on the brand of epoxy resin you are using. Keep recommended temperature and avoid touching or disturbing the resin while it is curing to prevent imperfections in the finish.
After the resin has cured, sand the surface lightly with a fine grit sandpaper to remove any imperfections or drips. Be careful not to sand too aggressively, as this can damage the resin finish. Once the surface is smooth, clean it again with a tack cloth or a damp cloth to remove any dust. Any scratches made, will disappear with second coat.
SECOND COAT
To achieve a high gloss finish, apply a second coat of epoxy resin following the same steps as before. This will help to further enhance the depth and shine of the finish. Allow the second coat to cure completely before using the wood surface.
In conclusion, achieving a smooth and glossy finish with epoxy resin on wood requires careful preparation, mixing, and application. By following these steps and techniques, you can create a beautiful and durable finish that will protect and enhance the natural beauty of the wood. Epoxy resin for wood is a versatile and effective way to add a touch of glamour to your woodworking projects. With practice and patience, you can master the art of working with epoxy resin and create stunning finishes on your wooden creations.
For more information visit:
RESIN GLORY
https://www.resin-glory.com/
01522394688
Lincoln
Welcome to our Online Epoxy Resin Store! Shop with confidence and hear what our customers have to say. Find best epoxy resin products, UK supplies.
